Dell Networking S5248F-ON Switch

Tech Specs

• Switches:
  S5248F, 48x 25GbE SFP28 + 2x 200GbE QSFP28-DD + 4x 100GbE QSFP28, 2x AC PSU, Fan modules, I/O Panel to PSU Airflow, Dell SmartFabric OS10
  S5248F, 48x 25GbE SFP28 + 2x 200GbE QSFP28-DD + 4x 100GbE QSFP28, 2x AC PSU, Fan modules, PSU to I/O Panel Airflow, Dell SmartFabric OS10
• Physical:
  1 RJ45 console/management port with RS232 signaling
  S5248F-ON: 48x25GbE SFP28 + 4x 100GbE QSFP28 + 2x100GbE QSFP28-DD
• Performance:
  Switching Capacity: 2.0 Tbps (4.0 Tbps full duplex)
  Throughput: 1.5 Bpps (3.0 Bpps full duplex)
  Latency (nano sec): 847
  1588v2 PTP timing (hardware)
  CPU Memory:16GB
  SSD: 64GB
  Packet Buffer: 32MB
  Maximum Power: 647W
  Typical Power: 310W
  Maximum Current: 5.8A@110VAC / 2.9A@220VAC
  Fan modules: 4
  Form Factor: 1RU
  Dimensions: 17.1”Wx18.1”D x1.7”H 43.4Wx46.0D x4.4H (cm)
  Weight: 9.7kg (21.4lbs)
  Max Thermal Output: 2208 BTU/h
  Packet buffer memory: 32MB
  MAC Addresses: 32K min, 288K max**
  IPv4 Hosts: 16K min, 168K max**
  IPv6 Hosts: 8K min, 100K max**
  IPv4 Routes: 128K**
  IPv6 Routes: 64K**
  Multicast Routes: 16K
  L2 Ingress ACL: 2K
  L2 Egress ACL: 256
  IPv4 Ingress ACL: 2K
  IPv4 Egress ACL: 2K
  IPv6 Ingress ACL: 1K
  IPv6 Egress ACL: 1K
  VLANs: 4K
  MSTP instances: 63 instances
  PVST instances: 150 instances
  Total LAG: 128
  Total members per LAG: 16
  LAG load balancing: Based on layer 2, IPv4 or IPv6 headers
• Environmental:
  Power supply: 100–240 VAC 50/60 Hz
  Max Operating specifications:
  AC Max. Operating specifications: Operating temperature: 32° to 113°F (0° to 45°C)
  Operating humidity: 5 to 90% (RH), non-condensing
  Max. Non-operating specifications: Storage temperature: –40° to 158°F (–40° to 70°C)
  Storage humidity: 5 to 90% (RH), non-condensing
  Fresh air Compliant to 45°C
• Transceiver Optics (Optional):
  2x100GbE, 2xSR4, QSFP28-DD
  2x100GbE, 2xPSM4-IR, QSFP28-DD
  2x100GbE, 2xCWDM4, QSFP28-DD
  100GbE, SR4 QSFP28
  100GbE, PSM4 (500m) QSFP28
  100GbE, CWDM4 (2Km) QSFP28
  100GbE, LR4 QSFP28
  40GbE, SR4 optic QSFP+
  40GbE, BIDI optic QSFP+ (Duplex)
  40GbE, SM4 optic QSFP+ (Duplex)
  40GbE, LM4 optic QSFP+ (Duplex)
  40GbE, PSM4 10Km, QSFP+
  40GbE, LR4 optic QSFP+
  40GbE, ER4 optics QSFP+
  25GbE, SR, NOF SFP28
  25GbE, LR, SFP28
  10GbE, SR SFP+, short reach
  10GbE, LR SFP+, long reach
  10GbE, ER SFP+, extended reach
  10GbE, ZR SFP+ extra extended reach 10G,
  10GBASE-T use with QSA in QSFP+ port, 30m reach on CAT6a/7
  1GbE, SX SFP
  1GbE, LX SFP
  1GbE, ZX SFP
  1GbE, 10km, BiDi SFP
  1GbE, 40km, BiDi SFP
  1GbE, 80km, BiDi SFP
  1GbE, 1000BASE-T, Gen2, SFP
• Cables (Optional):
  100GbE, 4x25GbE, QSFP28 to 4xSFP28, passive DAC 100GbE, QSFP28 to QSFP28, active optical
  100GbE, QSFP28 to QSFP28, passive DAC
  100GbE, 2x50GbE, 2xQSFP to 2xQSFP28, passive DAC, breakout 40GbE, QSFP+ to QSFP+, active optical
  40GbE, QSFP+ to QSFP+, passive DAC 40GbE, MTP to 4xLC optical breakout
  40GbE, 4x10GbE, QSFP+ to 4xSFP+, passive DAC
• Safety and emissions:
  Safety
  UL/CSA 60950-1, Second Edition
  EN 60950-1, Second Edition
  IEC 60950-1, Second Edition Including All National Deviations and Group Differences
  EN 60825-1 Safety of Laser Products Part 1: Equipment Classification Requirements and User’s Guide
  EN 60825-2 Safety of Laser Products Part 2: Safety of Optical Fibre Communication Systems
  FDA Regulation 21 CFR 1040.10 and 1040.11 Emissions
  Australia/New Zealand: AS/NZS CISPR 22: 2006, Class A
  Canada: ICES-003, Issue-4, Class A
  Europe: EN 55022: 2006+A1:2007 (CISPR 22: 2006), Class A
  Japan: VCCI V3/2009 Class A
  USA: FCC CFR 47 Part 15, Subpart B:2011, Class A
  
• RoHS:
  All S Series components are EU RoHS compliant.