Dell Networking N2048P Switch

Tech Specs

• Switch Features:
  N2048P: 48x RJ45 10/100/1000 Mb PoE+ (up to 30.8w) auto- sensing ports, 2x SFP+ ports, 2x stacking ports, 1 integrated 1000W PSU (requires C15 plug)
• Physical:
  2 rear stacking ports (21Gbps) supporting up to 84Gbps (full-duplex)
  2 integrated front 10GbE SFP+ dedicated ports
  USB (Type A) port for configuration via USB flash drive
  Auto-negotiation for speed and flow control
  Auto MDI/MDIX, port mirroring
  Flow-based port mirroring
  Broadcast storm control
  Energy-Efficient Ethernet per port settings
  Redundant variable speed fans
  Air flow: I/O to power supply
  Integrated power supply: 1,000W AC (N2048P)
  RJ45 console port with RS232 signaling (RJ-45 to female DB-9 connector cable included)
  Dual firmware images on-board
  
• Chassis:
  Size (1RU): 1.7 in x 17.3 in x 15.2 in (43.5 mm x 440.0 mm x 387.0 mm) (H x W x D) (N2048P)
  Approximate weight: 14.9914lbs/6.8kg (N2048P)
  Rack mounting kit with 2 mounting brackets, bolts and cage nuts
• Environmental:
  Power supply efficiency: 80% or better in all operating modes
  Max. thermal output (BTU/hr): 6,069.8 (N2048P)
  Power consumption max (watts): 1,738 (N2048P)
  Operating temperature: 32° to 113°F (0° to 45°C)
  Operating humidity: 95%
  Storage temperature: –40° to 149°F (–40° to 65°C)
  Storage relative humidity: 85%
  
• Performance:
  MAC addresses: 8K (16K theoretical*)
  Static routes: 256 (IPv4)/128 (IPv6)
  Dynamic routes: 256 (IPv4)
  Switch fabric capacity: 220Gbps (N2048 and N2048P) (full duplex)
  Forwarding rate: 164Mpps (N2048 and N2048P)
  Link aggregation: 128 LAG groups, 144 dynamic ports per stack, 8 member ports per LAG
  Priority queues per port: 8
  Line-rate Layer 2 switching: All (non-blocking)
  Line-rate Layer 3 routing: All (non-blocking)
  Flash memory: 256MB
  Packet buffer memory: 4MB
  CPU memory: 1GB
  RIP routing interfaces: 256
  VLAN routing interfaces: 256
  VLANs supported: 4,094
  Protocol-based VLANs: Supported
  ARP entries: 1,024
  NDP entries: 400
  Access control lists (ACL): Supported
  MAC and IP-based ACLs: Supported
  Time-controlled ACLs: Supported
  Max number of ACLs: 100
  Max ACL rules system-wide: 2,048
  Max rules per ACL: 1,023
  Max ACL rules per interface (IPv4): 1,024 (ingress), 512 (egress)
  Max ACL rules per interface (IPv6): 512 (ingress), 256 (egress)
  Max VLAN interfaces with ACLs applied: 24
  
• Transceiver Optics (Optional):
  Transceiver, SFP, 1000BASE-T
  Transceiver, SFP, 1000BASE-SX, 850nm wavelength, up to 550m reach
  Transceiver, SFP, 1000BASE-LX, 1310nm wavelength, up to 10km reach
  Transceiver, SFP, 1000BASE-ZX, 1550nm wavelength, up to 80km reach
  Transceiver, SFP+, 10GbE, LRM, 1310nm wavelength, up to 220m reach
  Transceiver, SFP+, 10GbE, SR, 850nm wavelength, up to 300m reach
  Transceiver, SFP+, 10GbE, LR, 1310nm wavelength, up to 10km reach
  Transceiver, SFP+, 10GbE, ER, 1550nm wavelength, up to 40km reach
  
• Cables (Optional):
  Stacking cable 0.25m, 1m and 3m
  Dell Networking, cable, SFP+ to SFP+, 10GbE, copper twinax direct attach cable, 0.5m, 1m, 3m, 5m and 7m
• Safety and emissions:
  Australia/New Zealand: ACMA RCM Class A
  Canada: ICES Class A; cUL
  China: CCC Class A; NAL
  Europe: CE Class A
  Japan: VCCI Class A
  USA: FCC Class A; NRTL UL
  Eurasia Customs Union: EAC
  Germany: GS mark
  Product meets EMC and safety standards in many countries inclusive of USA, Canada, EU, Japan, China.
  For more country-specific regulatory information and approvals, please see your Dell representative
• RoHS:
  Product meets RoHS compliance standards in many countries inclusive of USA, EU, China, and India. For more country-specific RoHS compliance information, please see your Dell representative.
  EU WEEE
  EU Battery Directive
  REACH