Dell Networking N1524 Switch

Tech Specs

• Base:
  Dell N1500 Series
• Switches:
  N1524: 24x RJ45 10/100/1000Mb auto-sensing ports, 4x SFP+ ports, 1 integrated 40W PSU
  
  N1548P: 48x RJ45 10/100/1000Mb PoE+ (up to 30.8w) auto-sensing ports, 4x SFP+ ports, 1 integrated 600W PSU (requires C15 plug)
• Power Cords:
  C13 to NEMA 5-15, 3M
  C13 to C14, 2M
  C15 to NEMA 5-15, 2M (C15 for PoE N-Series only)
• Power Supplies:
  RPS720 external power supply for N1500 non-POE (720 watts): N1524 and N1548 (sold separately)
  MPS1000 external power supply for N1500 PoE+ switches (1000 watts): N1524P and N1548P (sold separately)
• Cables (Optional):
  Dell Networking cable, SFP+ to SFP+, 10GbE,
  copper twinax direct
• Transceiver Optics (Optional):
  SFP, 1000BASE-T
  SFP, 1000BASE-SX, 850nm wavelength, up to 550m reach
  SFP, 1000BASE-LX, 1310nm wavelength, up to 10km reach
  SFP, 1000BASE-ZX, 1550nm wavelength, up to 80km reach
  SFP+, 10GbE, SR, 850nm wavelength, up to 300m reach
  SFP+, 10GbE, LR, 1310nm wavelength, up to 10km reach
  SFP+, 10GbE, ER, 1550nm wavelength, up to 40km reach
• Physical:
  4 integrated front 10GbE SFP+ dedicated ports
  2 10GbE can be used as stacking ports
  USB (Type A) port for configuration via USB flash drive
  Auto-negotiation for speed and flow control
  Auto MDI/MDIX, port mirroring
  Flow-based port mirroring
  Broadcast storm control
  Energy-Efficient Ethernet per port settings
  Redundant variable speed fans
  Air flow: I/O to power supply
  Integrated power supply: 40W AC (N1524),
  600W AC (N1548P)
  RJ45 console port with RS232 signaling (RJ-45 to female DB-9 connector cable included)
  Dual firmware images on-board
  Switching engine model: Store and forward
• Environmental:
  Power supply efficiency: 80% or better
  Max. thermal output (BTU/hr): 103.1 (N1524), 5824.3 (N1548P)
  Power consumption max (watts): 30.2 (N1524), 1704 (N1548P)
  Operating temperature: 32° to 113°F (0° to 45°C)
  Operating humidity: 95%
  Storage temperature: –40° to 149°F (–40° to 65°C)
  Storage relative humidity: 85%
• Chassis:
  Size (1RU, H x W x D): N1524: 1.7 in x 17.3 in x 10.1 in N1548P: 1.7 in x 17.3 in x 15.2 in Approximate weight: 6.6lbs/3kg (N1524), 15.4lbs/7kg (N1548P) Rack mounting kit with 2 brackets, bolts & cage nuts
• Performance:
  MAC addresses: 16K
  Static routes: 256 (IPv4)/128 (IPv6)
  Dynamic routes: 256 (IPv4)
  Switch fabric capacity: 128Gbps (N1524) (full duplex);
  176Gbps (N1548P)
  Forwarding rate: 128Mpps (N1524);
  164Mpps (N1548P)
  Link aggregation: 64 LAG groups, 144 dynamic ports per stack, 8 member ports per LAG
  Priority queues per port:8
  Line-rate Layer 2 switching: All (non-blocking)
  Line-rate Layer 3 routing: All (non-blocking)
  Flash memory: 256MB
  Packet buffer memory: 1.5MB
  CPU memory: 1GB
  RIP routing interfaces: 128
  VLAN routing interfaces: 128
  VLANs supported: 512
  Protocol-based VLANs: Supported
  ARP entries: 2,048 (IPv4)/512 (IPv6)
  NDP entries: 400
  Access control lists (ACL): Supported
  MAC and IP-based ACLs: Supported
  Time-controlled ACLs: Supported
  Max number of ACLs: 100
  Max ACL rules system-wide: 2,048
  Max rules per ACL: 1,023
  Max ACL rules per interface (IPv4): 1,023 (ingress), 1,023 (egress)
  Max ACL rules/interface (IPv6): 512 (ingress), 509 (egress)
  Max VLAN interfaces with ACLs applied: 24